...instrukcja serwisowa w pełni czytelna i kompletna. Dziękuję!
Tekstowy podgląd strony 87 (kliknij aby zobaczyć)
3 Use the magnetic screwdriver to remove the (2) screws (Figure 6-10, callout 1).
Once the screws have been removed, rotate the rear of the Delivery Assembly up and forward and lift it out of the printer.
Figure 6-10
Delivery Assembly Removal (2 of 2) Note
Upon reinstallation, the tabs on the front end of the Delivery Assembly must fit under the sheet metal fuser plate below to correctly reseat the Delivery Assembly.
